Product ID: XT-C-NOZ
About the Nozzles Set
This is a nozzles set for 1.75mm filament 3D printer, materials are brass and stainless stell.
Including :
1.Brass Nozzle: 0.2mm|1pcs, 0.6mm|1pcs, 0.8mm|1pcs, 0.4mm|5pcs
2.Stainless Still Nozzle: 0.2mm|1pcs, 0.6mm|1pcs, 0.8mm|1pcs, 0.4mm|5pcs
3.Totally 16pcs nozzle in a package
About Brass Nozzle
Brass is a common material for 3d printer extruder in the market for FDM filaments. The following are technologies of the brass nozzle.
- Appearance: A smooth and no burrs appearance with size number for recognize
- Inner: Smooth and no burrs as well, low consistency coefficient – those help filament to flow smoothly. If it is coarse surface inside will cause resistance when filament is flowing through- this is the reason why filaments could not flow out smoothly.
- Chamfer: Cutting chamfers, same theory with inner.
- Connector: With its flat contact surface, issues of material leaking out were well solved, which efficiently prevent printer head from material leakage.
- Size: 13*6mm
About 304 Stainless Steel Nozzle
Hardness of 304 stainless steel is very high, so it is a good material for printer nozzle. Frequent use and prolonged use will damage the nozzle, especially in printing the first level. Inevitable, nozzle rubs against with build plate when it began to move and print, and badly damaged and disfigured. But 304 stainless steel nozzle will great reduce this situation.
1.Appearance: A smooth and no burrs appearance with size number for recognize
2.Inner: Smooth and no burrs as well, low consistency coefficient – those help filament to flow smoothly. If it is coarse surface inside will cause resistance when filament is flowing through- this is the reason why filaments could not flow out smoothly.
3.Chamfer: Cutting chamfers, same theory with inner.
4.Connector: With its flat contact surface, issues of material leaking out were well solved, which efficiently prevent printer head from material leakage.
5.Size: 13*6mm
Reviews
There are no reviews yet.